A2FE Series High Speed Motor

Product introduction:

The fixed displacement plug-in motor A2FE Series High Speed Motor is equipped with a standard axial tapered piston rotary group of bent axis design. Hydrostatic plug-in motors are intended primarily for installation in mechanical gearboxes, e.g. track drive gear boxes. The design of the A2FE Series High Speed Motor with the mounting flange in the center of the housing allows it to be almost fully integrated into a mechanical gearbox to give an extremely compact unit.
The particular advantages of the plug-in motor over kit designs are complete unit; ready assembled and tested easy assembly integral plug-in to mechanical gearboxes no installation tolerances to consider

Features:

--Fixed plug-in motor with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open and closed circuits.
--Far-reaching integration in mechanical gearbox due to recessed mounting flange located in the center of the case (extremely space-saving construction)
--The output speed is dependent on the flow of the pump and the displacement of the motor
--The output torque increases with the pressure differential between the high-pressure and the low pressure side.
--Small dimensions
–High total efficiency
–Complete unit, ready assembled and tested
–Easy to install, simply plug into the mechanical gearbox
–No configuration specifications to be observed when installing
–Totally interchangeable with original Rexroth A2FE Series High Speed Motor.

Technical Parameter of A2FE Series High Speed Motor:

Selection of A2FE Series High Speed Motor

1.displacement of motor
2.type of output shaft

Application of A2FE Series High Speed Motor